Caring for your Plantation Shutters
To properly care for your Norman Shutters, renowned for their durability and resistance to peeling, cracking, chipping, and yellowing, follow these instructions.
Dusting and cleaning
Use a clean, dry feather duster, cloth, or a vacuum with a brush attachment to gently remove dust and debris from the shutters. Ensure to wipe the louvres or slats in both the open and closed positions for thorough cleaning.
Avoid water and abrasive chemicals
Do not immerse the shutters in water or use abrasive chemical solvents as this can cause discolouration and wood warping.
Specific cleaning recommendations
For Woodlore Shutters, use a cotton cloth dampened with water for best results. Avoid polyester cloths as they tend to create static, which attracts dust.
Avoid ultrasonic cleaning
Ultrasonic cleaning is not recommended for Norman Shutters, as it may not produce the desired cleaning effect.
Caring for your SmartDrape Shades
Caring for your SmartDrape Shade is crucial to ensure its durability and maintain its appearance. Follow these simple steps to clean and care for your shade.
Cleaning your shade
- Remove the fabric from the fabric vane clip and fold it gently.
- Place the folded fabric in a laundry bag before putting it in the washing machine.
- Use a gentle cycle with cold water, avoiding additional spin cycles.
- After washing, hang the fabric outside to air dry. Fan drying is also suitable for this product.
- Once completely dry, reassemble the fabrics on the rail with the vanes open for thorough drying.
Remember
Avoid using bleach or any bleach-containing products on this material.
Specific cleaning recommendations
If wrinkles appear after washing or during transportation, use a steam iron at a temperature of 90–100 degrees Celsius to smooth out the fabric.
Alternatively, hang the shade for a few days to allow wrinkles to naturally reduce.
Caring for your Roman Shades
Light dusting
Use a duster to gently remove any dust from the Roman Shades. Alternatively, you can use a vacuum with a soft brush attachment or a handheld vacuum to effectively remove dust and debris.
Spot cleaning
For spot cleaning, use a soft cloth or sponge moistened with lukewarm water. Gently dab the affected area until the spot is removed. If needed, add a mild detergent solution to the cloth or sponge. Blot the spot gently to avoid creasing or damaging the blind. Rubbing can damage the fabric. After spot cleaning, allow the blind to air dry completely in a fully lowered position. Do not steam.
Caring for your Honeycomb Shades
To maintain the beauty of your Honeycomb Shades, routine cleaning is essential. Here are the proper methods for cleaning your blinds.
Light dusting
Use a soft brush, feather duster, or a compressed air/hair dryer set to cool to gently remove light dust from the blinds. If vacuuming is necessary, use a hand-held vacuum with low suction or a vacuum brush attachment. Avoid using excessive suction or vigorous brushing. If using a mild cleaning solution, ensure the headrail is never immersed in liquid.
Spot cleaning
For spot cleaning, dampen a clean cloth or sponge with warm water. Gently dab the affected area until the spot is removed. If needed, add a mild detergent solution to the cloth or sponge. Blot the spot gently to avoid creasing the blind; do not rub the fabric vigorously. After spot cleaning, allow the blind to air dry completely in a fully lowered position.
By following these cleaning techniques, you can effectively maintain the beauty and cleanliness of your Honeycomb Shades without causing damage to the fabric. If you have any questions or need further assistance, please do not hesitate to reach out.
Caring for your Soluna Roller Shades
Caring for your Soluna Roller Shades is essential to preserve their beauty and sustainability. Follow these cleaning methods to keep your blinds looking their best.
Dusting
Use a duster to gently remove any light dust from the Roller Shades. Alternatively, you can use a vacuum with a soft brush attachment or a handheld vacuum to effectively remove dust and debris.
Spot cleaning
Roller fabrics cannot be dampened or spot-cleaned with water as it will damage the fabric. Avoid using water on these fabrics. Spot-clean Solar Screens with a damp cloth if needed. Use a mild detergent sparingly and ensure thorough rinsing. Always allow the blind to dry completely in the lowered position before operating it again.
Ironing and steaming
Do not attempt to iron Soluna Roller Blind fabrics as this will permanently damage the fabric.
Caring for your Wooden and Faux Wood Blinds
Caring for your SmartPrivacy Venetian Blinds is essential to preserve their beauty and sustainability. Follow these cleaning methods to keep your blinds looking their best.
Dusting and cleaning
Use a clean, dry feather duster, cloth, or a vacuum with a brush attachment to gently remove dust and debris from the blinds.
Thorough cleaning technique
Ensure thorough cleaning by wiping the louvres or slats in both the open and closed positions.
Avoid water and abrasive chemicals
Do not immerse the blinds in water or use abrasive chemical solvents, as this can lead to discolouration and warping of the material.
Avoid ultrasonic cleaning
Ultrasonic cleaning is not recommended for SmartPrivacy Blinds.
Caring for your Aluminium Blinds
Caring for your CityLights Blinds is crucial to ensure their durability and maintain their appearance. Follow these simple steps to clean and care for your blinds.
Dusting and vacuuming
Use a microfibre cloth, feather duster, or vacuum with a soft brush attachment to gently remove dust and debris. Clean slats in both open and closed positions to ensure thorough coverage.
Spot cleaning
Mix warm water with mild detergent or white vinegar. Wring out your cloth or clean sock until damp, then gently wipe each slat from top to bottom. Dry immediately with a soft cloth to avoid streaks.
Soak for deep cleaning
For a deeper clean, carefully remove the blinds by disengaging the headrail from the mounting brackets and place them in a bathtub lined with towels. Fully submerge the blinds in warm, soapy water with the slats open, and let them soak for up to 30 minutes. Gently wipe each slat with a sponge to remove buildup, then rinse thoroughly. Pat dry with a towel and allow the blinds to air dry completely before rehanging.
